Home / Shop
VAC Statement 450S iQ Stereo Amplifier
- Description
- Specifications
- Customer Reviews (0)
VAC Statement 450S iQ Stereo Amplifier
The 225-watt/channel Statement 450S iQ is a reduced-scale application of all of the techniques, concepts, and parts developed for the larger Statement 450 iQ. It is appropriate for the highest quality systems where space is a consideration or where extreme power is not needed. The 128-pound audio chassis is floated via an energy decoupling tripod atop the 88-pound power supply. Simply put, this heirloom quality instrument is second only to the Statement 450 monoblocks for reproducing music with the “breath of life” that is always our goal.
The Statement 450S iQ power amplifier features the VAC iQ Intelligent Continuous Automatic Bias System.
Mechanical Design
The overall architecture of the amplifier chassis minimizes the presentation of external vibration. The internal parts are the finest kind, specifically chosen for sound and reliability. We start with 0.25” aircraft aluminum for a rigid basis, and tailor the mounting points and couplings for the desired result. Custom machined feet provide a slight, controlled decoupling of the power supply from the external environment, while the audio chassis connects via a tripod of custom designed stainless steel cups and balls, controlling of the flow of vertical energy inputs and dissipating lateral energy inputs. The chassis is finished in a metallic base coat/clear coat finishThe sculptured faceplates must have been made from a solid block of aluminum — they are 3/8 inch thick with the edges chamfered to about 1/4 inch. Finished in silky gold-speckled black, the faceplates are an almost artistic likeness of the VAC’s sound quality. To guarantee quality, all chassis parts and lacquering are done in-house.
Electrical Design
The hand-wiring approach presented in the Statement 450 far exceeds conventional hand wiring and previous three dimensional techniques. Careful architecture and orientation of parts in 3D allows passive control of radiated fields to an unprecedented degree for an audio amplifier. Special consideration of the ways in which they interact with the chassis, sensitive circuit points, and each other increases purity and resolution. Between the two chassis, 105 lbs. of custom magnetic transformers contribute to the corresponding optimal mass loading. The Statement 450 features a direct-coupled input and driver circuit, extremely fast and vivid sound is achieved from both single-ended and balanced sources
VAC’s Very High Speed Parallel (VHSP)
This technique uses fast, lithe devices in an analogue parallel processing configuration that allows the speed and control required to preserve delicacy and natural sound.
The Very Low Impedance Driver (VLID)
This circuit gains much greater control over the transfer function achieved in the output stage, improving linearity and increasing headroom. There is palpably more control, greater subjective power per watt, and increased detail.
Power Supply
The external power supply also uses custom transformers, wound in the USA; there are no lightweight off-the-shelf magnetics here. The three massive transformers, which power seven separate basic supplies, are isolation mounted in a separate shie
MSRP: $60,000
SPECIFICATIONS
Wattage | 225 watt/channel |
Gain | 37 dB, SE 31 dB, balanced |
Frequency response | 4 Hz to 75 kHz |
Power bandwidth | 20 Hz to 70 kHz |
Inputs | Single-ended input via RCA jack, non-inverting Balanced input via XLR jack, non-inverting relative to pin 2 (“pin 2 hot”, traditional |
Outputs | Connections to precisely match loudspeaker loads of 2, 4, and 8 ohms |
Tubes | 8x KT88 6x 6SN7 |
Residual noise | Typically, 700 microvolts at the speaker terminals |
Voltage | May be factory configured for operation at 100, 120, 220, or 230/240 volts |
Power Cord | Detachable power cord, standard IEC power receptacle |
12-volt Trigger | included |
Illumination | Illuminated logo may be switched off |
Finish | Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard. Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost. |
Warranty | Two years parts and labor, excluding tubes (USA, see manual for full details) |
Dimensions (H x W x D) | Audio chassis (not including knobs and connectors): 9.75 x 17.8 x 18.25 in. (24.8 x 45.2 x 46.4 cm.) Power supply (not including connectors): 5.5 x 17.8 x 18.25 in. (14 x 45.2 x 46.4 cm.) |
Shipping weight | Audio chassis: 128 lbs. (58.2 kg.) Power supply: 84 lbs. (36.4 kg.) |
*Specifications subject to change without notice.