Home / Shop
Ortofon MC Cadenza Bronze Phono Cartridge
- Description
- Specifications
- Customer Reviews (0)
MC Cadenza Bronze
The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire.
Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.
Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
MC Cadenza Series' accessories included
- 1 x Stylus brush, fibre
- 1 x Screwdriver
- Leadwires, pair LW-6N
- Screws, pair M2,5 x 3
- Screws, pair M2,5 x 5
- Screws, pair M2,5 x 6
MSRP: $2,689
MC Cadenza Bronze Technical data
Output voltage at 1000 Hz, 5cm/sec. - 0.4 mV
Channel balance at 1 kHz - < 1 dB
Channel separation at 1 kHz - > 24 dB
Channel separation at 15 kHz - > 20 dB
Frequency response 20 Hz - 20 kHz - +/-1.5
Tracking ability at 315Hz at recommended tracking force *) - 80 µm
Compliance, dynamic, lateral - 12 µm/mN
Stylus type - Nude Ortofon Replicant 100 on conical alu cantilever
Stylus tip radius - r/R 5/100 µm
Tracking force range - 2.2-2.7 g (22-27 mN)
Tracking force, recommended - 2.5 g (25 mN)
*) Typical value
Tracking angle - 23°
Internal impedance, DC resistance - 5 Ohm
Recommended load impedance - 50-200 Ohm
Cartridge body material - Stainless steel / Aluminium
Cartridge colour - Bronze/Black
Cartridge weight - 10.7 gram